A new combi boiler installed by ACF Plumbing & Heating typically costs £1,899 to £2,990, including removal of the old boiler, commissioning, controls, warranty registration and certification. Premium models, conversions and relocations cost more.
It usually starts on a cold morning. The radiators stay lukewarm, the shower runs cold, or the boiler shows a fault code for the third time this winter. You start searching for prices and find figures that range from suspiciously cheap to eye-watering, with very little explanation of what sits behind them.
As Gas Safe-registered installers based in Corby, we fit boilers across Kettering, Wellingborough and the rest of Northamptonshire. This guide sets out what a new boiler really costs with us, what is included in that price, what pushes it up and how to make sure you are comparing quotes fairly.
What a New Boiler Costs with ACF
Most new boiler installations by ACF Plumbing & Heating cost £1,899 to £2,990, depending on the boiler you choose and the work your home needs; premium models cost more. These are full installed prices, not the cost of the boiler on its own. Every installation includes:
- Removal of the old boiler: we disconnect and responsibly remove the existing boiler and the waste that comes with it.
- Fitting and commissioning: the new boiler is installed and commissioned by a Gas Safe-registered engineer.
- System testing and controls: we test the system and set up your controls so you know how to use them.
- Warranty registration and certification: we register the manufacturer warranty and leave you with all the certification you need.
If anything extra is needed, it is written into your quotation before any work starts, so the price you agree is the price you pay. You can see the full details on our new boiler installation page.
What Changes the Price
Two homes on the same street can end up with quite different quotes. These are the main reasons:
- Like-for-like swap or conversion: replacing a combi with a new combi in the same spot is the most straightforward job and normally takes one day. Converting from one type of system to another, for example removing a hot water cylinder, takes longer and costs more.
- Moving the boiler: relocating a boiler to a new position means new gas, water and condensate pipework and often a new flue route. Conversions and relocations can take two to three days.
- The boiler itself: output, model range and manufacturer all affect the price, and so does the length of warranty that comes with it.
- Controls: a basic programmer costs less than a smart thermostat, although better controls can make your heating easier to manage.
The only way to get an accurate figure is for us to look at your current setup, which is why we quote properly rather than guessing over the phone.
Want a Fixed Price for Your Home?
Tell us about your current boiler and we will come back with a clear, fixed quote. Or call ACF on 01536 665695.
Get a Free QuoteCombi, System or Regular: Which Do You Need?
The type of boiler that suits your home has a bigger effect on cost than most people expect.
- Combi boilers heat water on demand straight from the mains, so there is no hot water cylinder and no tank in the loft. They suit most flats and small to medium homes and are usually the simplest to install.
- System boilers work with a hot water cylinder, which makes them a good fit for homes with more than one bathroom where several taps or showers may run at once.
- Regular (heat-only) boilers use a cylinder plus a cold water tank in the loft. They are usually found in older homes and are often kept where the existing pipework was designed around them.
Swapping like for like is normally the cheapest route. Changing type can make sense, but it adds work, so we will always explain the options and the difference in price before you decide.
Warranties and Brands
We are Worcester Bosch-approved and Vaillant- and Ideal-accredited installers, so we can offer the manufacturers’ extended warranties on their boilers. Depending on the manufacturer and model you choose, warranties range from 5 to 18 years, subject to annual servicing and the manufacturer’s terms.
That last condition matters. Most manufacturers require a service every 12 months to keep the warranty valid, so it is worth budgeting for an annual boiler service, which costs £90 + VAT with us. A yearly service also keeps the boiler running safely and efficiently.
Spreading the Cost
A new boiler is rarely a purchase anyone plans for. If paying in one go is not practical, finance is available on new boiler installations through our partner Phoenix Financial Consultants, subject to status. You can read more on our finance page and ask us about it when we quote.
How to Compare Boiler Quotes Like for Like
When you have more than one quote in front of you, check that they cover the same things:
- Is the old boiler removed and disposed of, or is that extra?
- Is the installer Gas Safe registered? Ask for the registration number and check it.
- Which boiler make and model is being fitted, and how long is the warranty?
- Are controls, system testing, commissioning and warranty registration included?
- Are any extras, such as relocation or a conversion, written into the price?
A cheaper quote that leaves out some of these can end up costing more. If you have a question about a quote you have received, get in touch and we will happily talk it through.
Frequently Asked Questions
A straightforward boiler replacement normally takes one day. Conversions, relocations or more complex installations may take two to three days.
Yes. We disconnect and responsibly remove the existing boiler and associated waste as part of the agreed installation.
Depending on the boiler manufacturer and model selected, warranties can range from 5 to 18 years, subject to annual servicing and the manufacturer’s terms.
Yes. Finance is available on new boiler installations through our partner Phoenix Financial Consultants, subject to status. See our finance page for details.